High Capacity Vacuum Pump

Standard Capacity Vacuum Pump

High Capacity
Vacuum Pump

Standard Capacity
Vacuum Pump

40 microns

100 microns

5 CFM

2 CFM

1/3 HP

1/6 HP

2 stage rotary vane

1 stage rotary vane

28 pounds

15 pounds

$295.00

$195.00

• Power and capacity for a wide range of service applications.
• High CFM rating for fast evacuation.
• Two-stage rotary vane design.
• Long-lasting high vacuum oil included with pump.
• Uses standard 110-volt power source.

A high vacuum pump that features a fast 5 CFM pumping capacity for shorter pump down times.
Engineered to give you years and years of trouble-free operation.
In actual Laboratory tests, this vacuum pump consistently out-performed other major (and more expensive) brands. This unit reached its maximum vacuum in minutes, while every other vacuum pump we tested took more than two hours to reach the 40 micron level.

Pumps down to an ultimate vacuum of 40 microns !

Ideal for all physics experiments requiring a high vacuum. Duplicate Rutherford's & Crooke's experiments, manufacture your own X-Ray and high power Laser tubes...
as well table-top particle accelerators using our High Voltage Power Supply.

High Capacity Vacuum Pump: $295.00

• Power and capacity for a wide range of service applications.
• Single-stage rotary vane design.
• Long-lasting high vacuum oil included with pump.
• Uses standard 110-volt power source.

A very affordable high vacuum pump that will give you years and years of trouble-free operation.
Ideal for all vacuum applications where an extremely high vacuum is not necessary. The 100 micron limit on this pump is more than adequate to perform most physics experiments requiring a substantial vacuum.
It's also perfect for vacuum mold work, vacuum distillation, and a wide variety of other vacuum service applications. Conduct high voltage electrical discharge experiments using our High Voltage Power Supply.

Pumps down to an ultimate vacuum of 100 microns !

Standard Capacity Vacuum Pump: $195.00

We occasionally get in used High Capacity Vacuum Pumps.
These units are not worn down, beat to death pumps. They are 'zero timed'. That means they have been totally refurbished at a factory authorized shop to bring them back to original specifications.
The only mechanical difference between a used pump and a new one is that a new pump looks bright & shiny, and the used pumps frequently have scratches and surface abrasions on them.
We try and update the list below to keep it current as possible:

Used Pumps Currently Available: 0
List last updated on: 03/06/2007

Used High Capacity Vacuum Pump: $195.00

High Vacuum Oil

It's generally a good idea to change the oil in vacuum pumps once in a while to maintain high vacuum levels. The oil traps and contains contaminants imurities in the air it evacuates as well as water vapor. Eventually the water & contaminants build up and prevent the pump from reaching its ultimate vacuum.
Our Premium High Vacuum Oil is ideal for any high vacuum pump application.
Note: Never use ordinary motor oil or other common oils in Vacuum Pumps!
Sold in 1 quart containers

High Vacuum Oil (1 qt): $10.00